Tough Coat uses only 100% acrylic and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and floors and dries to a matte finish.

Tough Coat is NOT recommended for dark painted surfaces as trapped humidity in the paint may cause streaking in the finish. Try our Beeswax Finish or Natural Stain & Finishing Oil instead! 

Tough Coat differs from our competition with its use of pure acrylic. Other products on the market are using lesser acrylic resins which will yellow and embrittle over time, not binding as well leaving a less durable finish. Fusion Tough Coat provides a true, non-yellowing clear coat.

To Use:

Apply with a brush or rag onto painted or stained surfaces. If applying to a recently painted surface, allow the surface to dry 12 hours before applying. 

For maximum durability, apply two coats waiting 2-4 hours between coats. In humid areas, longer drying times may be required.  Cleans with soap and warm water.

Be sure to gently mix your Tough Coat prior to using it as the matting agent and other ingredients may settle to the bottom.

Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied.